Tiling System
SAMTILE ® AM, conforming to IS 15477:2019, Type 2, a product with License for use of BIS / ISI Certification Mark, is a special purpose Adhesive for thin-bed installation of tiles with apparent porosity of below 3% on all interior & exterior floor & wall even in wet, submerged condition. It is also recommended for tile-on-tile application.
Packing
20-kg HDPE bags
Form
Powder
Coverage
2.5-4.0 kg/m 2
Color
Grey / White
Safety
Use gloves, protective clothing, goggles & protective gear
• Mix thoroughly 20-kg of SAMTILE ® AM with 5.0 ltrs of water till it becomes homogenous
• SAMTILE ® AM is ready for application
• Interior & exterior floor & wall even in wet, submerged condition
• Cement plaster, cement concrete, cement screed & for tile-on-tile application
Tiling System
SAMTILE ® GP, conforming to IS 15477: 2019, Type 1, a product with License for use of BIS / ISI Certification Mark, is a general purpose Adhesive for thin-bed installation of tiles with apparent porosity of above 3% on cement-based surface / substrate. It is also recommended for tile-on-tile application.
Packing
20-kg HDPE bags
Form
Powder
Coverage
2.5-4.0 kg/m 2
Color
Grey
Safety
Use gloves, protective clothing, goggles & protective gear
• Mix thoroughly 20-kg of SAMTILE ® GP with 5.0 ltrs of water till it becomes homogenous
• SAMTILE ® GP is ready for application
• Interior dry area floors and vertical walls
• Cement plaster, cement concrete, cement screed & for tile-on-tile application
Tiling System
SAMTILE ® AM-3 is a high strength adhesive and is suitable for tiles and stone-tiles of any size on exterior wall substrates, like plaster and concrete. It is used in thin bed method for installation of all types of tiles and natural stone-tiles.
Packing
20-kg HDPE bags
Grouting
≈ 8 h on wall and ≈ 24 h on floor
Coverage
1.2 kg/m 2
Color
Grey / white ready-mixed
Temperature range for application
5 – 35 C
Take the entire pack of 20-kg SAMTILE ® AM-3. Add 5.0 ltrs of water and mix properly with a mixing machine. Apply it on the substrate with a square-notch trowel in thin-bed method for installation of all types of tiles and natural stone-tiles. Substrates like plaster and concrete should be dust-free and saturated with water.
SAMTILE ® AM-3 is used for laying all types and formats of Ceramic, Vitrified, Clay Bricks, Basalt, Glass- Mosaic and Porcelain Tiles and natural stone-tiles.
Tiling System
SAMTILE ® AMF is a high strength adhesive and is suitable for tiles and stone-tiles of any size on exterior wall substrates and dry wall-board substrates. It is used in thin bed method for installation of all types of tiles and natural stone-tiles.
Packing
20-kg HDPE bags
Grouting
≈ 8 h on wall and ≈ 24 h on floor
Coverage
1.2 kg/m 2
Color
Grey / white ready-mixed
Safety
Use gloves, protective clothing, goggles & protective gear
Take the entire pack of 20-kg SAMTILE ® AMF. Add 5.0 ltrs of water and mix properly with a mixing machine. Apply it on the substrate with a square-notch trowel in thin-bed method for installation of all types of tiles and natural stone-tiles. Substrates like plaster and concrete should be dust-free and saturated with water.
SAMTILE ® AMF is ideal for tiles and stones of any size to be installed on exterior wall-substrates, like
plaster and concrete, and dry wall-board substrates, like Gypsum-boards, Plywood, Wood, Calcium Silicate Boards, medium density fiber boards, fiber cement boards, bison, panel etc.
Tiling System
SAMTILE ® AMF-2 is a high strength adhesive and is suitable for tiles and stone-tiles of any size on exterior wall substrates and dry wall-board substrates. It is used in thin-bed method for installation of all types of tiles and natural stone-tiles.
Packing
20-kg HDPE bags
Grouting
≈ 8 h on wall and ≈ 24 h on floor
Coverage
1.2 kg/m 2
Color
Grey / white ready-mixed
Temperature range for application
5 – 35 0 C
Take the entire pack of 20-kg SAMTILE ® AMF-2. Add 5.0 ltrs of water and mix properly with mixing machine. Apply on the substrate with a square-notch trowel in thin-bed method for installation of all types of tiles and natural stone-tiles. Substrates like plaster and concrete should be dust-free and saturated with water.
SAMTILE ® AMF-2 is ideal for tiles and stones of any size to be installed on exterior wall-substrates, like plaster and concrete, and dry wall-board substrates, like Gypsum-boards, Plywood, Wood, Calcium Silicate Boards, medium density fiber boards, fiber cement boards, bison, panel etc.
Tiling System
SAMTILE® GMA is a water and frost-resistant victual-proof Tile Adhesive Type-II. It is used in the thin bed method. Due to very high creep strength, heavy tiles and slabs can be placed downwards. To increase the elasticity, water resistance and adhesion, add SAMTILE® AE.
Packing
20 kg bags
Form
Powder
Coverage
Approximately 2.750 kg / m2 depending on the size of tiles
Color
White
Safety
Use protective gloves
• Mix thoroughly 5-kg of SAMTILE® GMA with 1.4 litres of water, to a homogenous consistency.
• Mix again after 15 minutes.
• SAMTILE® GMA is ready for application.
• It is a water and frost-resistant victual-proof adhesive.
• On areas with higher static or thermic stress like heat-prone floor, prefabricated concrete, terraces, swimming pools or facades, use SAMTILE® AE as additive to SAMTILE® GMA.
• Not suitable for wooden, metal or plastic surfaces.
• Placing tiles, panels, slabs, mosaic, non-fatty natural stones, construction and insulating panels.
• For living quarters, shower and bathrooms, swimming pools, terraces and facades.
Tiling System
SAMTILE ® GPL is a water and frost resistant victual-proof Tile Adhesive. It is used in the thin bed method. Due to very high creep strength, heavy tiles and slabs can be placed downwards. To increase the elasticity, water resistance and adhesion, add SAMTILE ® AE.
Packing
20-kg bag / 30-kg bag
Form
Powder
Coverage
Approximately 3 kg / m 2 , depending on the size of tiles
Color
Grey
Safety
Use protective gloves
• Mix thoroughly 5 kg of SAMTILE ® GPL with 1.4 litres of water, to a homogenous consistency.
• Mix again after 15 minutes.
• SAMTILE ® GPL is ready for application.
• It is victual-proof.
• Resistant to water and frost.
• On areas with higher static or thermic stress like heat-prone floor, prefabricated concrete, terraces,
swimming pools or facades, use SAMTILE ® AE as additive to SAMTILE ® GPL.
• It is not suitable for wooden, metal or plastic ground surfaces.
• It is used for placing tiles, panels, slabs, mosaic, non-fatty natural stones, construction and insulating
panels.
• For living quarters, shower and Bathrooms, swimming pools, terraces and facades.
Tiling System
SAMTILE ® JM is ready to use joint filling mortar based on cement and special additives. It is victual-proof.
Packing
1-kg pouch x 12 (in one colour)
Form
Powder
Base
Cement
Color
White, Ivory, Jaisalmer, Brown, Sky- Blue, Grey, Dark-Grey,
Jet-Black
Safety
Use protective gloves
• Mix 1-kg of SAMTILE ® JM with approximate 0.3 litre of Water.
• Stir again after 15 minutes
• SAMTILE ® JM is applied by means of a rubber-trowel diagonal to the joint.
• Clean by means of a soft sponge and water for 5-15 minutes after application.
• SAMTILE ® JM is used for filling joints up to 7mm, between ceramic tiles, panels, mosaic for walls, floors, indoors and outdoors.
• It is victual-proof.
• To increase plasticity, elasticity, water resistance and adherence of SAMTILE ® JM, use a special
synthetic dispersion SAMTILE ® AE.
• Filling joints between ceramic tiles, panels, mosaics for walls, floors, indoors and out doors.
Tiling System
SAMTILE ® JME is a three component solid epoxy grout used for joints from 2 to 15 mm on floorings and walls, glass mosaic, ceramic tile, vitrified tile, marble and stone. SAMTILE JME ensures the lasting chemical and mechanical performance of high resistance coverings. Sealed membrane is hard wearing, hygienic yet attractive in cosmetic finish. Available in various shades.
Packing
1 kg and 5 kg(in one colour)
Form
Part 1 – liquid Part 2 – Liquid Part 3 – Coloured fillers
Base
Epoxy
Color
White, Ivory, Jaisalmer, Brown, Sky-Blue, Grey, Dark-Grey,
Jet-Black
Safety
Use protective gloves
