Concrete Admixtures
SAMPLAST® 150 is formulated to meet the highest level of quality standard that prevails in the international market as a normal water reducing admixture & workability aid.
Packing
200 kg drum, 50 kg carboy, 30 kg carboy and 5 kg jerry can
Product Type
Liquid
Base
Selected Organic Polymers
Color
Brown
Safety
Non-toxic and non-flammable
• Add SAMPLAST® 150 (150 gm per 50 kg of cement) in water and stir gently.
• Prepare dry-mix of cement, aggregates and sand as usual.
• Slowly add dry mix to the solution while mixing.
• Apply concrete mix as usual.
• Reduces micro porosity.
• Increases workability, density and strength without increase in cement.
• Enhances compressive strength of concrete-mix with reduction in water content.
• Effects savings in cement consumption without affecting quality.
• RCC load-bearing structures like beams and columns
• Building foundations and footings
• RCC support structures for overhead water tanks, revolving restaurants etc.
• High rise towers, for installation of radar systems, TV signal receivers, search lights, wind turbines etc.
SAMPLAST® 150 is recommended for use with concrete mix with cement content up to 350 kg /
cu mtr.
Concrete Admixtures
SAMPLAST® 150SP is formulated to meet the highest level of quality standard that prevails in the
international market as a normal water reducing admixture.
Packing
200 kg drum, 100 kg carboy, 50 kg carboy & 5 kg jerry can
Product Type
Liquid
Base
Hydrolysed carbohydrate derivatives
Color
Brown
Safety
Non-toxic and non-flammable
• Add SAMPLAST® 150SP (maximum up to 1.5% of cement) in water and stir gently.
• Prepare dry-mix of cement, aggregates and sand as usual.
• Slowly add dry mix to the solution while mixing.
• Apply concrete-mix as usual.
• Reduces micro-porosity.
• Increases workability, density and strength without increase in cement.
• Enhances compressive strength of concrete-mix with reduction in water content.
• Effects savings in cement consumption without affecting quality.
• RCC load-bearing structures like beams and columns
• Building foundations and footings
• RCC support structures for overhead water tanks, revolving restaurants etc.
• High rise towers, for installation of radar systems, TV signal receivers, search lights, wind turbines etc.
SAMPLAST® 150SP is recommended for use with concrete mix design M25 and above.
Concrete Admixtures
SAMPLAST® 300 is a synthetic plasticizer derived from sulphonated naphthalene.
Packing
200 kg drum, 100 kg carboy, 50 kg carboy & 5 kg jerry can
Product Type
Liquid(instantly dispersible in water)
Base
Sulphonated naphthalene
Color
Brown
Safety
Non-toxic and non-flammable
• Add correct quantity of SAMPLAST® 300 directly to the mixing water.
• Prepare dry mix of cement, aggregates and sand as usual.
• Slowly add dry mix to the solution while mixing.
• Apply concrete-mix as usual.
• Reduces micro porosity.
• Increases workability of concrete mix without reducing compressive strength.
• Increases compressive strength of concrete mix with reducing water content of the mix.
• Enhances cohesion by minimizing segregation and bleeding thereby giving better surface finish.
• Increases durability of concrete by increasing density.
• Provides high early strength.
• RCC load-bearing structures like beams and columns
• Building foundations and footings
• RCC support structures for overhead water tanks, revolving restaurants etc.
• High rise towers, for installation of radar systems, TV signal receivers, search lights, wind turbines etc.
Concrete Admixtures
SAMPLAST® AC is a chloride-free accelerating, water reducing admixture to meet quality requirement.
Packing
50 kg carboy, 30 kg carboy and 5 kg jerry can.
Product Type
Liquid
Color
Straw Brown
Safety
Toxic but non-flammable. Use hand-gloves and goggles
• Add the correct quantity of SAMPLAST® AC to the mixer at the time of mixing water.
• Prepare dry mix of cement, aggregates and sand as usual.
• Slowly add dry-mix to the solution while mixing.
• Apply concrete-mix as usual.
• Increases workability and strength.
• Accelerates setting and high early strength, thereby improving frost resistance.
• Safe in pre-stressed and reinforced concrete.
• Pre-cast concrete for stadium etc..
• Concrete placed in cold weather
• Concrete for repairs
• Mortars for brick work
Concrete Admixtures
SAMPLAST® HP3 is unique third generation superplasticizer based on modified polycarbozylic ether to achieve the highest performance level of concrete design meeting quality standard that prevails in the international market as a high water reducing admixture.
Packing
200 kg drum, 100 kg drum, 50 kg carboy & 5 kg jerry can
Product Type
Liquid
Base
Blend of specially selected organic polymers
Color
Pale
Safety
Non-toxic and non-flammable
• Add SAMPLAST® HP3 (maximum up to 1.5% of cement) in water and stir gently.
• Prepare dry mix of cement, aggregates and sand as usual.
• Slowly add dry-mix to the solution while mixing.
• Apply concrete-mix as usual.
• Reduces micro porosity.
• Possesses very high water reducing capability.
• Its ability to work with an extremely low water / cement ratio allows to produce high performance
concrete with high early and final strength (18 to 24 hours).
• Increases workability, density and strength without segregation or bleeding.
• Increases compressive strength of concrete mix with reducing water content of the mix.
• Requires low vibration.
• Bridges / pile foundations, piers, PQC concrete for roads
• Building foundations and footings, RCC load bearing structures like beams and columns
• RCC support structures for overhead water tanks, revolving restaurants etc.
• High rise towers, for installation of radar systems, TV signal receivers, search lights, wind turbines etc.
SAMPLAST® HP3 is recommended for use with concrete mix design m25 and above.
Concrete Admixtures
SAMPLAST® RM is formulated to meet the highest level of quality standard that prevails in the international market as a high range of water reducing and retarding admixture.
Packing
200 kg drum, 100 kg drum, 50 kg carboy & 5 kg jerry can
Product Type
Liquid
Base
Sulphonated napthelene formaldehyde
Color
Brown
Safety
Non-toxic and non-flammable
• Add SAMPLAST® RM (maximum up to 1.5% of cement) in water and stir gently.
• Prepare dry mix of cement, aggregates and sand as usual.
• Slowly add dry-mix to the solution while mixing.
• Apply concrete-mix as usual.
• Reduces micro porosity.
• Retardation can be attained maximum 2.5 hours depending upon site condition and ambient
temperature.
• Increases workability, density and strength without increase in cement.
• Enhances compressive strength of concrete mix with reducing water content of the mix.
• Effects savings in cement consumption without affecting quality.
• RCC load bearing structures like beams and columns
• Building foundations and footings
• RCC support structures for overhead water tanks, revolving restaurants etc.
• High rise towers, for installation of radar systems, TV signal receivers, search lights, wind turbines etc.
• Ready mix and pumpalble concrete.
• High grade concrete.
Concrete Admixtures
SAMPLAST® WR100 is formulated to meet the highest level of quality standard that prevails in the
international market as a water reducing and accelerating admixture.
Packing
1 kg x 12 carboys
5 kg x 4 carboys
20 kg carboy
220 kgs drum
Product Type
Liquid
Base
Sulphonated naphthalene
Color
Brown
Safety
Non-toxic and non-flammable
