• Provides excellent chemical-resistance to a wide range of industrial chemicals and gases.

• Coating film is hard but flexible with excellent adhesion to all types of metal and cement based
surfaces.

• Coating film can be modified to be non-slip.

• Coating film is hard wearing, hygienic and yet attractive in cosmetic finish.

• Provides dust-free and jointless coatings.

• Can be used as a sealer on heavy duty epoxy screeds, provided epoxy screed is at least three days old.

• Steel structures, leg supports and structural framework exposed to corrosive atmosphere

• Pipelines, ducts, pipe racks etc. to provide protection against corrosive atmosphere

• Structural members (like beams, columns), RCC working platforms, machinery foundations etc.
exposed to corrosive atmosphere.

• A chemical and abrasion-resistant product.

• Provides long-term protection from corrosion.

• No priming is required.

• High film builds up in single coat.

• Economical and versatile.

• Gives tough bonding

• It is most suitable particularly in Effluent Treatment Plant, Sewage Works, Docks and Harbour
installations.

• It is used as high quality protective coating for metal structures against corrosion from aggressive
condition.

• Gives high flexural strength and adhesion with substrate and ensures excellent performance under
dynamic operating conditions.

• Provides rapid installation and strength gain.

• Minimum creep enables early commissioning of plant.

• Useful where mechanical properties resistant to a wide range of chemicals, acids and alkalies are
required.

• Resistant to water and frost.

• Support beneath crane and transporter rails.

• High speed turbines, centrifuges, drop forges etc.

• Reciprocating machinery and other operating or test equipment subject to heavy dynamic or mobile loads.

• Provides excellent chemical resistance to a wide range of industrial chemicals and gases.

• Coating film is hard but flexible with excellent adhesion to all types of metal and cement based
surfaces.

• Coating film can be modified to be non-slip

• Coating film is hard wearing, hygienic and yet attractive in cosmetic finish.

• Provides dust-free and jointless coating.

• Can be used as a sealer coat on heavy duty epoxy floor screeds, provided epoxy screed is at least three days old.

• Production assembly areas, workshops, dairies, soft drinks production, bottling plant, breweries,
kitchens, showrooms

• Hospital, hotel and studio floors

• Pharmaceuticals and chemicals factory working floors

• Computer room floor

• Air craft hanger areas

• Self-levelling formulation provides dust-free, seamless surface which is extremely easy to clean.

• Good abrasion resistance and withstands foot and light vehicular traffic.

• Gives a very attractive floor finish.

• Resists many industrial chemicals.

• Ideal for industrial or commercial locations where a hard-wearing hygienic, dust-free environment is important.

• Hospital clean rooms

• Electronics assembly plants

• Switch gear plant-floors

• Office suites, laboratories, show-rooms etc

• Provides exceptional resistance to abrasion and a wide range of chemicals and increased durability
at a low maintenance cost.

• Gives good gripping surface to both vehicular and pedestrian traffic.

• No interference with existing levels as 3.0 / 5.0mm thickness is required.

• Heavy engineering plants, chemical and process areas.

• Steel work, dairies, breweries, oil refineries, paint workshops, battery rooms, plating factories.

• Effluent storage tanks, manhole chambers along effluent line, wash area in chemical and
pharmaceutical industry

• Loading / unloading bays of LPG, petroleum and chemical terminals of sea port and railway yards.

• Gives high flexural strength and adhesion substrate ensures excellent performance under dynamic
operating conditions.

• Provides rapid installation and strength gain.

• Minimum creep at the time of commissioning of plant.

• Useful where mechanical properties and resistance to a wide range of chemicals, acids and alkalies are required. Resistant to water and frost.

• For spilled or cracked concrete structures.

• Bedding of pre-cast concrete beams

• Repair of concrete structures of acid tanks, sea walls, industrial floors in plating shops, chemical.

• handling and process areas.

• Provides excellent bonding in between base substrate and epoxy coating / screed.

• Coating film is thin but flexible with excellent adhesion to concrete, mortar and screed.

• Eliminates porous in concrete surface.

• For strong bonding between concrete and epoxy coating / screed.

• For better sealing of concrete screed surface.

• Provides excellent bonding in between base substrate and epoxy coating / screed.

• Coating film is thin but flexible with excellent adhesion to concrete, mortar and screed.

• Coating film eliminates porous in concrete surface.

• For strong bonding between concrete and epoxy coat / screed.

• For better sealing of concrete screed surface.

• The high chemical-resistance and adhesion of epoxy resin combined with the sacrificial protection
obtained from zinc particles provides a priming coat suitable for application to ferrous metal surfaces under conditions of severe corrosion.

• It is used as a primer for chemical resistant surface based on polyurethane, epoxy and chlorinated
rubber resins.

• Steel structures, leg supports and structural framework exposed to corrosive atmosphere.

• Pipelines, ducts, pipe racks etc. to provide protection against corrosive atmosphere.

• Structural members (like beams, columns), machinery foundations etc. exposed to corrosive atmosphere

• Structural steelwork, chemical processing plants, machinery, internal and external tank surfaces and all iron and steel structures where long term protection is essential.